GMC1413/GANTRY MACHINING CENTER
CNC GANTRY MACHINING CENTER
The bottom is a one-piece design, the inner stiffener is more rigid, the whole mechanical structure is cast by HT300material, and tempered aging treatment, to ensure long-term non-deformation.
Ultra-wide column design, increase the contact area with the beam, reduce the vibration caused by processing.
Box Beam design, with double-layer bone-strengthening structure, double beam rigidity, enhance the durability ofmechanical accuracy and the stability of machining accuracy.
All-in-one head can enhance the rigidity of structure, effectively prevent the influence of resonance and heat change, andstrengthen the rigidity of cutting.
CNC GANTRY MACHINING CENTER
The machine tool adopts gantry frame,bed and column integrated cast iron, the distance between spindle center and Z-axis is small, which reduces the tilting moment of spindle box and improves the precision and stability of the machine tool.
The main key parts of the bad, crossbeam, sliding saddle,spindle box,etc.are all made of resin sand molding,high-strength and high-quality cast iron,which is good in stability.
It adopts the international advanced design concept of the machine tool and the structure is reasonable and reliable.
The five-axis machining center has the characteristics of high efficiencyand high precision. The workpiece can complete complex processingin one clamping. lt can adapt to the processing of modern molds suchas automotive parts and aircraft structural parts. There is a bigdifference between the five-axis machining center and the pentahedronmachining center. Many people don’t know this and mistakenly regardthe pentahedron machining center as a five-axis machining center.The five-axis machining center has five axes: x, y, z, a, and c. The xyz andac axes form five-axis linkage machining. lt is good at spatial curvedsurface machining, special-shaped machining, hollowing machining,punching, oblique holes, bevel cutting, etc. The “pentahedron machiningcenter” is similar to a three-axis machining center, except that it can do fivefaces at the same time, but it cannot do special-shaped machining, punchoblique holes, cut bevels, etc.
| GMC1413、3016 | ||
| SPECIFICATIONS | GMC1413 | GMC3016 |
| Table size(width x length ) | 1100×1400 | 1400×3200 |
| Worktable longitudinal stoke (X axis) | 1300 | 3200 |
| Spindle lateral stroke (Y axis) | 1300 | 1650 |
| Spindle up and down stroke(Z axis) | 700 | 800 |
| Cross gate width | 1400 | 1650 |
| Distance between spindle nose and table surface | 120-820 | 250-1050 |
| Workbench T-slot (number-width x pitch ) | 9-18×125 | 7-22x 200 |
| Spindle specifications (model/mounting diameter ) | BT40/Ф150maybeBT50/Ф155 | BT50/Ф190 |
| Spindle speed | speed8000r/min | speed6000r/min |
| Gear ratio | Pulley Ratio1:1（optional 1.5:1） | |
| X,Y,Z axis ball screw specifications | X:5010 Y:5010 Z:5010 | X:8020 Y:5010 Z:5010 |
| X,Y,Z axis guideway specifications | X-axis: roller rail 45; Y-axis: roller rail 45; Z-axis: roller rail 45 | X axis: roller 55, heavy load specification: Z axis: rectangular guide rail |
| X.Y.Z axis servo motor drive mode and ratio | X, Y, and Z axes are straight connected | Belt transmission, transmission ratio X-axis 2.5:1; Y-axis 2:1; z-axis 2:1 |
| Recommended spindle motor selection | 11Kw Wide Area Motors | 18.5KwWide Area Motors |
| X Y Z axis motor torque | X:36;Y:36; Z:36( Sluice gate） | |
| Rapid traverse | 20 | 16 |
| Overall dimension (L x w x H) | 4200x2700x3300 | 8500x3500x3600 |
| Table load | 2 | 6 |
| Machine weight | 10 | 23 |
Factory
Photos of Customer Visit
Photos of On-site Installation
