CK6180/HORIZONTAL CNC MACHINE
PERFORMANCE CHARACTERISTICS
Machine guide rail and slide saddle guide rail are made of special materials, high frequency quenching, super hard and wear-resistant,durable,good processing accuracy.
The spindle with high precision spindle bearing group and precision assembly and dynamic balance test ensures the spindle with high precision, low noise and strong rigidity;
PERFORMANCE CHARACTERISTICS
Each lubrication point adopts forced automatic lubrication device for fixed point quantitative lubrication of lead screw and guide rail, when there is abnormal state or insufficient oil, automatically generate warming signal.
The guide rail is equipped with a scraping device to prevent the guide rail from being corroded by iron filings and coolant and to facilitate the cleaning of iron filings.
This series of CNC lathe is an economical CNC machine tool,is ageneralCNC automatic metal processing equipment, can carry outmechanicalparts semi-finishing and finishing, with reliablestructure,easyoperation and economic and practical characteristics.Suitablefor all kinds of shaft and disc parts to automatically completetheinternal and external cylindrical surface, conical surface. arcsurface.end face. grooving, chamfering and other processes ofcutting.and can turn metric straight thread, end thread and inchstraightthread and taper thread and other kinds of turning.
| CK6180/61100/61125 | ||||
| SPECIFICATIONS | unit | CK6180 | CK61100 | CK61125 |
| max.swing over bed | mm | Ф800 | Ф1000 | Ф1250 |
| X-axis rail span | mm | 330 | 330 | 330 |
| Z-axis rail span | mm | 600 | 600(Optional700) | 600(Optional700) |
| Max.swing over cross slide | mm | Ф480 | Ф650 | Ф850 |
| Distance between centers | mm | 1000/1500/2000/3000/4000/5000/6000 | ||
| Maximum turning length | mm | 1000/1500/2000/3000/4000/5000/6000 | ||
| Height of center | mm | 350 | 350 | 350 |
| Above ground | mm | 1050 | 1050 | 1050 |
| Spindle bore | mm | Ф130 | Ф130 | Ф130 |
| Bar diameter | mm | Ф128 | Ф128 | Ф128 |
| Hallows chuck tie rod through hole | mm | Ф115 | Ф115 | Ф115 |
| Spindle nose type | A2-11 | A2-11 | A2-11 | |
| Chuck size | mm | Manual ф 400 | Manual ф630 | Manual ф800 |
| Spindle bore taper | No | Metic120， | Metic120， | Metic120， |
| 1:20 | 1:20 | 1:20 | ||
| Spindle speed steps | rpm | 30-84.53-150.125-350.300-835R/MIN Manual fourth gear, | ||
| There is no scale variable speed in the file | ||||
| Tailstock quill diameter | mm | Ф130 | Ф130 | Ф130 |
| Tailstock quill taper | No | MT6# | MT6# | MT6# |
| Tailstock quill travel | mm | 265 | 265 | 265 |
| Tailstock configuration | Manual | Manual | Manual | |
| Number of electric tool holder positions | 4 | 4 | 4 | |
| Tool shake size | mm | 32×32(4-positiors) | 32×32(4-positiors) | 32×32(4-positiors) |
| The X is oriented to the X axis | mm | FDC4005-P3 | FDC4005-P3 | FDC4005-P3 |
| The X is oriented to the X axis | mm | FDC6310-P3 | FDC6310-P3 | FDC6310-P3 |
| XZ axis rapid traverse | m/min | 4/5 | 4/5 | 4/5 |
| X axis travel | mm | 400 | 500 | 625 |
| Minimum setting unit | mm | 0.001 | 0.001 | 0.001 |
| Main motor power | KW | 15 | 22 | 22 |
| Total power capacity | KW | 18 | 25 | 25 |
| Net weight | kg | 5100/5700/6200/7200 | 5200/5800/6300/7300 | 5300/5900/6400/7500 |
| Dimensions(L x W x H) | mm | 3500/4000/4500/5500x1900x1900 | 3500/4000/4500/5500/6000/7000/8000x2100x2000 | |
Factory
Photos of Customer Visit
Photos of On-site Installation
